{"product_id":"jabsco-blower-heavy-duty-flangemount-75mm-12v-4-0-m3minute","title":"Blower - Heavy Duty - Flangemount - 75mm - 12V - 4.0 m3\/minute","description":"\u003cp\u003eHigh capacity output with quiet running Delrin rotor. Continuously rated motor maximum 1 hour with 50% duty cycle = 1 hour on then 1\/2 hour off for cool down.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003cbr\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTough reinforced plastic housing\u003c\/li\u003e\n\u003cli\u003eMount to any flat surface\u003c\/li\u003e\n\u003cli\u003eSlip-On inlet ducting connection\u003c\/li\u003e\n\u003cli\u003eEfficient high volume air flow\u003c\/li\u003e\n\u003cli\u003eLow current draw\u003c\/li\u003e\n\u003cli\u003eCorrosion-resistant materials throughout\u003c\/li\u003e\n\u003cli\u003eN.M.M.A Type accepted\u003c\/li\u003e\n\u003cli\u003eDC models comply with USCG electrical regulations of title 33, chapter I, part 183; subpart I and ISO 8846 MARINE for ignition protection\u003c\/li\u003e\n\u003cli\u003eDC models comply with ISO 9097 marine\u003c\/li\u003e\n\u003cli\u003eDC models conform with EN 50081-1 for suppression of electromagnetic interference\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAir flow - 4.0 m3\/minute (150cfm)\u003c\/li\u003e\n\u003cli\u003eVoltage - 12Vdc\u003c\/li\u003e\n\u003cli\u003eAmperage - 6.5\u003c\/li\u003e\n\u003cli\u003eFuse size - 10A\u003c\/li\u003e\n\u003cli\u003eWeight - 2.3 kg (5 lb)\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWiring for DC models :\u003c\/b\u003e Use stranded copper wire. For lengths up to 25 feet (7.6m) from power source: Use 12 gauge wire for 12 Volt and 14 gauge wire for 24 Volt. Use larger wire for longer lengths. Use a 10 amp rated on-off switch in positive side of circuit (Model 44960-0003). Circuit must be protected with a fuse. Suggested fuse sizes are listed in the specifications table.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eNotice:\u003c\/b\u003e blower should be mounted away from extreme heat (More than 54.4 Celsius) to prevent distortion of blower wheel or housing.\u003cbr\u003e\u003cbr\u003eFor an exposed inlet, ventilator intake screen No. 34764-0000 provides a safe and attractive protection inlet.\u003cb\u003e Note:\u003c\/b\u003e This blower may also be mounted with inlet through bulkhead, using intake collar No. 34943-0000.\u003cbr\u003e\u003cbr\u003eJabsco blowers are primarily intended for intermittent duty cycles such as evacuating fuel vapours from bilge areas. If desired, they may also be used for other general air circulation applications with longer duty cycles. However, when doing so, it should be noted that the maximum motor life is approximately 1000 hours. Therefore, the blower should only be used for applications if this length of service is acceptable.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eOperation:\u003c\/b\u003e See following warning placard statement:\u003cbr\u003e\u003cbr\u003e\u003cb\u003eThe \"WARNING\" placard supplied with blower must be mounted adjacent to engine ignition switches (All locations) to comply with Title 33, Part 1834; Subpart K, USCG ventilation regulations.*\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e*Additional warning placards are available from factory by requesting form 43003-0418.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Jabsco","offers":[{"title":"Default Title","offer_id":45755639300344,"sku":"34739-0010","price":377.05,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0068\/6656\/7225\/files\/d4c4d807a1048af9bbb760c1fbdd61dd_bb4297cc-db3e-41d9-b152-0723478af3b6.png?v=1727162056","url":"https:\/\/www.bosunslocker.com.au\/products\/jabsco-blower-heavy-duty-flangemount-75mm-12v-4-0-m3minute","provider":"Bosuns Boat","version":"1.0","type":"link"}