Rule LoPro Bilge Pumps
Description
The NEW LoPro (low profile) bilge pumps are small enough to fit into tight spaces in the bilge - yet they pack real pumping power at 900 gallons per hour - 3,400 litres per hour - 57 litres per minute. These new pumps include numerous features for ease of installation, ease of use and multiple options for use.Â
2 models available - standard NON- auto or dual sensing AUTOMATIC.
Up to 900GPH - 3,400 LPH - 57 litres per minute at open flow
Up to 634GPH - 2,400 LPH - 40 litres per minute at 1 metre head
Up to 418GPH - 1,582 LPH -26 litres per minute at 2 metre headÂ
Maximum head height - metres =Â 0 flowÂ
Compact 60mm high ( port to the side ) 60mm wide (port upright)
Length - 195mm RWB5158 Std Model - 245mm RWB5159 Auto
Threaded discharge nozzle with multiple hose ports included as standard in the package - 4 different hose ports provided - 1 each 20mm, 25mm & 28mm straight & 1 + 20mm 90 deg elbow.
Straight discharge ports include a nitrile non-return check valve (for use on straight ports only - not to be used on 90 deg port)
NON- automatic Standard LoPro Pump
Includes all features as detailed aboveÂ
12 volt 4 amp use a 7.5 amp fuseÂ
NON-automatic operation - If automatic required - purchase RWB5159 automatic version - or use a Rule float switch.
RWB5158 NON-automatic Rule LP900D LoPro bilge pump 12volt
AUTOMATIC Operation LoPro Pump
The automatic LoPro includes all features as detailed further above with additional benefit of automatic operation in multiple modes - NO float switch is required.
High or low water sensing mode- the pump can be set to start operation at either 33mm or 50mm bilge water heightÂ
Electronic automatic timer mode- The pump can be set to automatically check for water every 2 1/2 minutes- if water is present it will continue to run and pump bilge water. This feature is very handy- however if you leave the boat unattended on a mooring it may run down the battery over time, if you don't have solar panels or a wind generator Etc to constantly charge the battery - in this case set the pump only to high or low modeÂ
Includes pump test modeÂ
Includes manual over-ride 3rd wire- requires a Rule 3 way panel switch RWB23 OR 107 to operate this featureÂ
12 volt 4 amp use a 7.5 amp fuseÂ
12 volt DC only- DO NOT run direct off a 240v- 12v transformer
RWB5159 Automatic Rule LP900S LoPro bilge pump 12volt
Shipping and returns
Shipping and customer service
We use Australia Post Eparcel for shipping if goods within Australia. If you would like to use an alternative shipping method please Contact Us and we can discuss alternatives.
When you contact us, a real person will call you back! This is what separates us from our competitors. We are a real store on QLD's Gold Coast with over 30 years experience in boating and Customer care.
Returns policy
We have a 30-day return policy, which means you have 30 days after receiving your item to request a return.
To be eligible for a return, your item must be in the same condition that you received it, unworn or unused, with tags, and in its original packaging. You’ll also need the receipt or proof of purchase.
To start a return, you can contact us at chandlery@bosuns.com.au. If your return is accepted, we’ll send you a return shipping label, as well as instructions on how and where to send your package. Items sent back to us without first requesting a return will not be accepted.
You can always contact us for any return question at chandlery@bosuns.com.au.
Have a question
PO Box 138, Main Beach QLD 4217
Street Address:Southport Yacht Club, Macarthur Parade, Main Beach QLD 4217
Trading HoursMonday - Friday - 7.30am – 5pm
Saturday - 8am to 4pm
Sunday - 8am to 12noon
(07) 55 911 911 | Fax (07) 55 916 147
Email: